Shower Upgrade 101 - Best Practices For New Unit Installation

Shower Upgrade 101 - Best Practices For New Unit Installation

Blog Article

Schedule Appointment

Nearly everybody may have their own unique thinking when it comes to How to Install a One-Piece Shower Unit.

A successful shower installation requires careful preparation and also a great deal of job. Most of the times, you will certainly need to do three types of tasks: framing wall surfaces, setting up the plumbing, and also ending up wall surfaces.

Prep work

First of all, you need to select the sort of shower that you desire to mount. It is necessary to identify whether the selected shower is capable of dealing with certain systems and can manage a secure level of water through the central heating boiler. A lot of shower systems nowadays are developed to be versatile to different water pressures (such as stored hot water and cold mains).
It is also important to think about the water stress as well as the planning of the piping and water drainage for the shower

Different Sorts Of Shower Units

Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower unit can be linked to the bath faucet based on your demand, and the water temperature level can be changed via the faucets. Push-on mixers are cheap as well as extremely straightforward to set up. However, although the tube connection is simple, it is quickly dislodged. In addition, it is bothersome to change the temperature.

Bath/Shower Mixer: The hose and also spray of this kind of shower are integrated with a bath mixer faucet, as well as the temperature can be readjusted via the bath faucets. It is an extremely cheap choice and no added plumbing is involved. Nonetheless, the bath/shower mixers likewise deal with troublesome temperature level control choices.

Guidebook Mixer: The pipe and spray of a hands-on mixer shower device are a part of the wall device and the cold and hot water supplies are attached to a single shutoff The temperature as well as pressure of the water are regulated through either one or a selection of knobs (in a lot more pricey showers). Although temperature control is a lot easier in hands-on mixer types, they are much more pricey than the previously pointed out mixers. They additionally require extra plumbing of cold and hot supply of water pipes.

Thermostatic Mixer: The tube and spray of this shower kind belong of the wall unit as well as the cold and hot water materials are attached to a single shutoff here as well. It is full with a built-in stabiliser to self-adjust the water temperature level and to avoid it from becoming too warm. One of the greatest benefits of a thermostatic mixer shower type consists of convenient temperature control. Nonetheless, it is the most costly of the various mixer options.

Power Shower: A power shower is a single device including an effective electrical pump that is capable of changing both the water stress and temperature. This kind of shower can be fitted if there is water from a cold water tank and a hot water cylinder. A power shower makes the modification of both stress and also temperature level very easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is supplied by a combination central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed into a mains cold water supply as well as it warms the water electrically. It is important to note that for this shower kind to be mounted, the keys pressure needs to be at least 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature as well as pressure to be changed by means of a knob. Models with temperature stabilisers are better as they remain untouched by various other taps elsewhere in use within the home. A major disadvantage of electrical showers is that the control handle just permits the alternative of heats at much less stress, or reduced temperature levels at a better stress. This is troublesome in the winter season when the spray is typically weak as well as the mains water is colder. However, this trouble is taken on in some versions which are offered with a winter/summer setting.

Method

Depending on the sort of shower you want to set up, the shower head should either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it should have a check valve.
Prior to beginning, it is a good idea to mark the positions of the shower head and control, and also to prepare the pipe-work included. Additionally, the water drainage system to eliminate the drainage will certainly require to be prepared. Both settings of the cable television route and the shower button will certainly likewise need to be thought about if an instantaneous or electrical shower unit is being mounted.
Make use of the direction guide given with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is important to remove the supply of water. In order to protect the pipelines, they ought to be given a water-proof covering and additionally fitted with separating valves. The pipelines can then be hidden into the wall as well as plastered over to neaten the general look.
Fit the base tray, shower head, and also installations.
Connect the major shower control to the pipelines that will be providing the water (This might require a women screw string adapter).
Reconnect the supply of water as well as examination the pipes for any kind of leaks, as some might need firm.
If you are installing an electric shower, remember to switch off the electricity supply before making any type of electrical links. Once these links have been made (there must be assistance within the user's manual), the power supply can be changed back on.

Readjusting Water Pressure to Match Your Shower

The cold water tank can be raised to a higher elevation (in some cases just 150mm (6inches)) by fitting a solid wooden support under it - possibly made up of struts and blockboards. If you select this alternative, the main as well as circulation pipes will certainly additionally have to be increased to fulfill the new elevation of the storage tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it must be attached into the power supply in order to operate.

Piping and also Drain

It is best to make use of 15mm diameter supply pipelines, and make the runs to the shower as brief and straight as possible so regarding keep maximum pressure as well as reduce warmth loss. Additionally, by minimising making use of joints for pipe corners, you can decrease the resistance in the flow of the water. You can achieve this by flexing the pipelines instead.

Many Typical Blunders

Breaking or neglecting neighborhood code restrictions.

Utilizing pipelines that are also tiny.

Attaching copper to galvanized without using a brass or dielectric fitting between both.

Not utilizing tape or pipeline substance at threaded joints.

Uneven your components when installing them.

Not installing an air void filling for fixtures.

Cutting supply stub outs as well brief to mount the shutoff valves onto after the finished wall remains in area.

Not properly aligning tubing right into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will trigger a leak.).

When turning the water back on in your home, always run the outside hose pipe shutoff or purge your commodes to bleed dirt and air from the lines. This debris can trigger issues in your sink taps as well as various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As an avid person who reads about How to Install a One-Piece Shower Unit, I imagined sharing that excerpt was really helpful. Those who appreciated our article please be sure to pass it around. Thanks for taking the time to read it.

Explore Now

Report this page